Symbol Plot - VCollab Presenter

VCollab Presenter users can add and display symbols at selected locations on the CAE model for Vector results , Tensor results, SPC and Pressure using the Symbol Plot option. The symbols can be displayed either in 2D or 3D as shown below

Symbol Plot Types

Result Type	Condition	3D	2D
Vector	Appears if CAE model contains at least one vector result.
Tensor	Appears if CAE model contains at least one tensor result.	Tensile Compression
SPC	Single Point Constraint plot appears if CAE model contains any SPC data.
Pressure	Appears if CAE model contains “Pressure Loads” result

Symbol Plot in CAE Menu

Click CAE|Symbol Plot to open the Symbol plot manager panel.

Symbol Plot Manager Panel

The various fields and options seen in the Symbol Plot Manager panel are explained below

Model	Select a CAE model.
Plot Type	Select a plot type.
Result	Lists the results based on the plot type selected.
Instance	Lists the instances based on the result selected.
Derived	Lists the derived vector for tensor results.
Complex	Select a complex component and edit angle. Applicable only for complex results.
Positions	Displays different user interfaces for node selection.
Pick	Pick a vertex (node based) on model.
Rect	Select multiple nodes/vertices by rectangular selection.
Hotspot	Select nodes/vertices from hotspot labels.
All IDs	Selects all valid CAE Node IDs from the visible parts for selected result.
Nodes	Lists all the nodes selected for current symbol plot.
Clear	Clears the nodes entered in the textbox.
Plot Name	Enter the name of the plot to be created.
Create	Creates the symbol plot associated with [Plot Name] and appends the name to plot list box below.
Delete	Deletes the selected or current symbol plot.
Options…	Opens up a dialog which allows users to control the size and color of the arrow.

SPC (Single Point Constraint)

This function creates multiple symbol plot based on the constraint type. It groups nodes or elements based on constraint type the node or element has. Then it creates a symbol plot with name “Constraint Type_T[xyz]_R[xyz]”.

There are 63 combinations of Translational and Rotational constraints.

For example,

T[x]_R[z] - “Translation is fixed only in X direction and Rotation is fixed only z direction”.

T[xyz] - “No Translation in all 3 degrees of freedom”.

R[xyz] - “No Rotation in all 3 degrees of freedom”.

T[xyz]_R[xyz] - “Completely constrained in all 6 degrees of freedom”.

Symbol Plot Options

After creating the Symbol plot, click on Options to open the Symbol Plot Options panel as shown below.

The various fields appearing in the Symbol Plot Options panel are explained below.

Note: All the options will effect only for the current symbol plot selected.

Steps to create a Symbol Plot

Click CAE | Symbol Plot.. to open the dialog as shown below

Select a CAE model name from the drop down list.

Select a Plot Type from the drop down list, which lists valid plot types based on the CAE model results.

Symbol Direction Definition: - CAE Result data is required for symbol direction. Result Information will be updated based on the plot type selected.

Select a Result

Select an Instance.

Select a derived vector for tensor type.

Select complex components if necessary.

Symbol Position Definition: Users can skip this if the plot type is of SPC or Pressure, in which case they can click the Create button directly without defining symbol positions. - In other cases, symbol positions are defined by Nodes. There are various options to select nodes,

Enable Pick option and click on the model to select nodes.

Nodes text box will be appended with nodes after each selection.

Enable Rect option to select nodes by region or window in the viewer.

Click Hotspots option to use current hotspot labels for symbol position.

Click All IDs option to use all Valid IDs for the selected results.

Node selection is not necessary for SPC and Pressure plots.

Symbol Plot Name: Default name is provided by application based on number of plots exists. Change the plot name if necessary.

Symbol Plot Creation: Click the Create button to create symbol plot. Created symbol plot name is appended to the list box below Create button.

Symbol Plot List and Visibility: All created symbol plots are listed in the box with a check box to enable/disable plot visibility. Users can hide some symbol plots to avoid messy visualization. Uncheck the plot names in the list box to hide it.

Symbol Plot Deletion: Select a plot in the list. Click the Delete button. The plot selected will be deleted from the viewer as well as from the list box.

Symbol Plot options : Using this option user can,

toggle between Symbol display type between 2D and 3D.

scale the symbol length and width.

enter a specific scale factor in the given text boxes.

change the color of symbols

Note: All the options are applicable only for the current symbol plot selected.

Steps to scale, change color and dimension of the symbols?

Define plot type, results and positions.

Click Create, which applies and displays the symbols.

Click the Options button, which opens up symbol plot options dialog. This UI allows user to control length/height, width and color of symbols.

The following image displays the symbols after modifying the symbol size and color.

Users can change the symbols into 2D. Select symbol type as 2D Symbol.

Users can select different view modes, only for Vector Type symbols in options dialog.

View mode: Auto is default one, which makes all symbols visible on the outer surface of the model.

View mode : From Position makes all symbols starts from vertices.

View mode : To Position makes all vector symbols end at vertices.

View mode : Resultant computes a single symbol by averaging all symbols and displays the resultant.

Users can create multiple plots and classify them with color and size.